LeadFar Technologies Inc.

Transformer Oil Gas Analyzers Online Dissolved Gas Monitors (Calisto)(2011/Jul/15 11:07:41)

Fri, 15 Jul 2011 11:07:41 +0800

Early detection of transformer incipient faults using continuous monitoring of dissolved hydrogen in insulating fluids.
Monitoring dissolved carbon monoxide as a key indicator of cellulose degradation (Calisto 2 only).
Continuous moisture monitoring.(2011/Jul/15 11:07:41)

Transformer Oil Gas Analyzers Myrkos - Portable DGA MicroGC (Myrkos)(2011/Jul/15 11:08:25)

Fri, 15 Jul 2011 11:08:25 +0800

MYRKOS is a portable Micro Gas Chromatograph that can measure separately the seven fault gases found in transformer oil when a problem is developing. In addition, MYRKOS also measures both air components: oxygen and nitrogen. Unlike other portable gas-in-oil analyzers, MYRKOS is as reliable as a laboratory, unbelievably fast and offers true repeatability, producing results you can trust.

(2011/Jul/15 11:08:25)

Partial Discharge Monitoring Partial Discharge Monitoring for EHV GIS(Qualitrol DMS) (GIS)(2011/Mar/30 18:03:58)

Wed, 30 Mar 2011 18:03:58 +0800

DMS introduced the world’s first continuous, on-line partial discharge monitor (PDM) for GIS in 1993. Since then the PDMG-R System has proved an invaluable tool to detect and alarm on potentially dangerous, developing dielectric faults before failure can occur.
Utilising advanced UHF technology, the PDMG-R System collects PD data from couplers installed on the GIS and transmits this information to PC based software for expert interpretation and analysis - allowing the condition of the insulation system to be simply and effectively monitored over the asset life.

PDMG-R Benefits

Enhances system reliability and reduces risks

Detects faults in real-time before failure, damage or loss of supply

Increases safety for personnel

Determines condition of GIS insulation

Implementation of efficient, condition-based maintenance strategies

Extends residual life of aging plant and defers capital costs

Reduces insurance premiums

Retrofits to most major GIS systems

(2011/Mar/30 18:03:58)

Partial Discharge Monitoring Partial Discharge Monitoring for Transformers(Qualitrol DMS) ()(2011/Mar/30 18:04:11)

Wed, 30 Mar 2011 18:04:11 +0800

DMS introduced the world’s first continuous, on-line partial discharge monitor (PDM) for GIS in 1993. Since then the PDMG-R System has proved an invaluable tool to detect and alarm on potentially dangerous, developing dielectric faults before failure can occur.
Utilising advanced UHF technology, the PDMG-R System collects PD data from couplers installed on the GIS and transmits this information to PC based software for expert interpretation and analysis - allowing the condition of the insulation system to be simply and effectively monitored over the asset life.

PDMT-S Benefits

Enhances system reliability and reduces risks

Detects faults in real-time before failure, damage or loss of supply

Increases safety for personnel

Determines condition of transformer insulation

Allows external events to be correlated with PD activity

Accurate location of PD defects using additional optional equipment

Implementation of efficient condition based maintenance strategies

Extends residual life of ageing plant and defers capital costs

Reduces insurance premiums

(2011/Mar/30 18:04:11)

Partial Discharge Monitoring PDMG-P Portable ()(2011/Mar/30 18:04:22)

Wed, 30 Mar 2011 18:04:22 +0800

DMS’s UHF Portable PD Monitor is used to undertake periodic partial discharge surveys in substations to provide early warning
of developing faults - enabling corrective action to be taken before complete breakdown occurs.
Employing the same advanced UHF technology as the permanently installed PDMG-R System, the portable provides a PD monitoring solution for low-cost/low-value GIS where continuous, on-line PD monitoring would be uneconomical.
The monitor, with integrated laptop, is easily transported in its heavyduty, aluminium case. PD data from up to 3 UHF couplers is collected and stored, and the type of defect identified automatically through the in-built expert system analysis program. The collected data can also be retrieved remotely via connection to a LAN or modem. Additionally, the PDMG-P can be used to make the PD measurements now integral to high-voltage GIS commissioning tests.

(2011/Mar/30 18:04:22)

Partial Discharge Monitoring BCM 200 - Breaker Condition Monitor(Qualitrol Hathaway ()(2011/Mar/30 18:05:19)

Wed, 30 Mar 2011 18:05:19 +0800

The BCM 200E is the newest addition to the Hathaway range of circuit breaker testing and monitoring equipment. This permanently installed microprocessor based system monitors and records each operation of an independent pole operated circuit breaker and automatically compares this data with Absolute Limits, set as part of the configuration. In addition recorded data is automatically compared with a known good reference record, or fingerprint, stored in memory. Any parameters outside user defined Operation Limits cause an alarm. The BCM 200E has the added advantage that it can perform accumulated contact duty calculations for the fault currents interrupted by each phase of the breaker.(2011/Mar/30 18:05:19)

Vibration and Field Balancing Instruments Easy-Balancer (VM-EB)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

Vibration analyzer and balancing instrument with:

Built in program in several languages
Balancing with 2 transducers simultaneously
Frequency analysis with transfer to PC
Envelope
Time signal
Coast-up and coast-down
Vibration / phase measurement for vibration animation
Total level
Bearing condition
Output to printer and computer(2010/Aug/19 10:49:51)

Vibration and Field Balancing Instruments Easy-Viber (VM-EV)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

Vibration Analyser with:

Built in program in several languages
Route measurements downloaded from PC-program
Balancing with 2 transducers simultaneously
Additional Frequency Analysis with transfer to PC
Envelope
Time signal
Coast-Up and Coast-Down
Vibration / Phase measurement for vibration animation
Total Level
Bearing Condition
Output to printer and computer(2010/Aug/19 10:49:51)

Vibration and Field Balancing Instruments Viber-A (VM-VA)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

Viber-A is the instrument for maintenance personnel
Viber-A is checking machinery after repair
Viber-A tells the production personnel when to stop or change to another machine
Viber-A can in many cases be used for balancing
Viber-A measures both normal vibrations and bearing condition
Viber-A has a comprehensive manual describing how to interpret vibration- and bearing condition- levels as well as two methods of single plane balancing(2010/Aug/19 10:49:51)

Vibration and Field Balancing Instruments Animation program for machine vibrations (Vibshape)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

With the animation program Vibshape you will "understand" how a machine vibrates and what measures should be taken.

Vibshape has functions for drawing of cubes, boxes and cylinders
Vibshape shows all the pictures in radial projection
Vibshape can move, copy or delete junctions
With the manual input the program is suitable for all instruments that can measure vibration and angle
Measuring data can be entered while the model is vibrating "live"
The zoom and view angle can easily be changed with the mouse
It is easy to change the mode shape frequency at animation
Automatic max and min deviation for print out or copying
Vibshape has a very "friendly" price level(2010/Aug/19 10:49:51)

On-Line Monitoring Systems VM-100 (VM-100)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

VM100 is a 16 channels automatic data collector with an additional 4 rpm inputs, dedicated mainly for continuous monitoring of rotating machines.
Up to sixteen VM100 units can be connected to a single PC using a RS485 multi-drop serial communication link.
The VM100 units are operating only as slaves. A serial converter RS-485 to RS-232 must be used on the computer side.

A wide range of measurement can be done, because the VM100 unite is hardware/software configurable and accepts a large range of transducers.

The VM100 unit is placed close to the measuring points. The saves installation and cable costs.

The VM100units are connected in series with using a 4 wire cable. This will further save installation and cable costs.(2010/Aug/19 10:49:51)

On-Line Monitoring Systems On-Line Monitoring Systems (Viber-M2)(2011/May/27 15:38:18)

Fri, 27 May 2011 15:38:18 +0800

Vibration Monitor 1 or 2-Channels

Features:
*Selectable low frequency range
*Selectable measuring Range
*Valbar strömsignal
*2 Alarm levels with Relays
*Selectable time delay
Outputs:
*Analysis signal
*mA output (RMS)
*Relays
Built-in display:
*VM42-A is available for accelerometers and VM42-H is available for velocity transducers.
Description:
*The transducer signal is compensated in the input amplifier to correct signal level and selected frequency range. This signal is available at the front panel BNC connector and on terminals for further analysis.
*When accelerometer or velocity transducers are used the analysis, alarm and mA signals are always measured in velocity. This signal can be amplified in 2 selectable ranges 0-10 and 0-100 mm/s. Other ranges are optional.
*The signal is converted to an RMS value. This DC-level is compared with the alarm levels. If the RMS level is higher than the alarm level a LED lamp is lit. If the RMS level stays higher then the alarm level during the whole selected delay time the relay is changing.
*The RMS level is converted to a corresponding current output selectable between 0-20mA or 4-20mA.
This signal is available on terminals for connection to other instruments or data logger.
Enclosure:
*Sealed (IP65), PVC box with transparent lid for overview of vibration levels, alarm settings and alarm status.
VM42 fulfils the following standards: EN50081-1, EN55011 (B), EN50082-2, EN61000-4-2,-3,-4,-5

(2011/May/27 15:38:18)

On-Line Monitoring Systems 19" Base frame for 10channels (VM41R)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

Vibration MonitorMax. 10 Channels

Every channel has:
Analysis output
mA output(RMS)
Independent alarm and trip relay functions
Transient and voltage protection on every input and output
The Base frame has:
Common power unit for all channels
Power supply 24VDC, 110VAC and 220VAC
Screw terminals for cable connections
Channel switch
Display for alarm and vibration level of selected channel
VM41R-H
-Vibration channel for velocity transducer
VM41R-A
-Vibration channel for accelerometer
VM41R-D
-Vibration channel for eddy current proximity probe(2010/Aug/19 10:49:51)

Vibration Sensors and Accessories Vibration Sensors and Accessories (CT-A102)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

(2010/Aug/19 10:49:51)

Vibration Sensors and Accessories Cables (Cables)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

Straight Cables
Coiled Cables

Straight Cables
Coiled Cables

(2010/Aug/19 10:49:51)

Vibration Sensors and Accessories CTC-SENSOR (CTC-SENSOR)(2011/May/27 14:51:35)

Fri, 27 May 2011 14:51:35 +0800

Precision Accelerometers
Rock-solid construction. Ultra-tight tolerances. Calibration trace-able to NIST. Plus, as part of our Lifetime Recalibration Service, we will recalibrate any of your CTC accelerometers anytime at no charge .All this at prices that start $8o less than last year. PLUS, CE OFFER VOLUME DISCOUNTS, TOO.(2011/May/27 14:51:35)

Vibration Sensors and Accessories Junction Boxes (Junction Boxes)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

Looking for a junction box? Look no further, because CTC offers the widest variety of junction boxes in the world. Our designs accommodate one to 48 channels of measurements at one location. Plus, all of our enclosures feature super-reliable NEMA 4X construction to ensure water- tight and corrosion - resistant operation. (2010/Aug/19 10:49:51)

Vibration Sensors and Accessories Mounting Hardware (Mounting Hardware)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

From installation tools to adhesives to the do-it-yourself instructions, CTC offers everything you need to mount accelerometers for portable or permanent measurements.(2010/Aug/19 10:49:51)

Laser Alignment Systems Easy-Laser D80 (EL-D80)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

Easy-Laser® BTA compactTM is the perfect tool for sheave and pulley alignment.
Mounted in a few seconds, the laser line projected onto the targets allows you to quickly ascertain and correct the misalignment.
It couldn，t be easier！

Shows the parallel and angular misalignment between the sheaves.
Much faster and more accurate than measuring with earlier, conventional methods.
For both horizontal and vertical mounted machines.
Alignment can be made by one operator.
Also suitable for non-magnetic sheaves.(2010/Aug/19 10:49:51)

Laser Alignment Systems Easy-Laser D200 (EL- D200)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

With the new Easy-Laser® BTA digital there finally is the possibility to document the alignment of a sheave/pulley alignment. Make a printout, store data in the display unit or transfer data to a PC.

For V-belts, timing belts, flat belts and chain drives.
For both horizontal and vertical mounted machines.
Magnetic attachment, means both hands are free to do the alignment.
Shows the parallel and angular misalignment of the sheaves, both digitally and graphically in live.u Calculates both shim- and adjustment values.
Documentation to printer or PC via RS232-interface.
Up to 125 measurements can be stored.
Much faster and more accurate than measuring with other, conventional methods.
Alignment can be done by one operator.(2010/Aug/19 10:49:51)

Laser Alignment Systems Easy-Laser D450 (EL-D450)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

Easy-Laser® D450 is a basic shaft alignment system, with the performance and Potential for expansion of our more advanced ones. It is designed for users who Want a simple, reliable and cost-effective measuring system for the alignment of horizontally-installed machines. With programs for 9-12-3 Horizontal Shaft Alignment and Softfoot. Functions for compensation of thermal growth and alignment tolerance check (see program list). Typical applications: Pumps, motors, gearboxes.(2010/Aug/19 10:49:51)

Laser Alignment Systems Easer-Laser D505 (EL-D505)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

Easy-Laser® D505 has all the programs and functions you could want for the alignment of rotating machines. The EasyTirnTM program allows alignment withas little as 40° rotation of the shafts. Functions for compensation of thermal growth, alignment tolerance check and reference foot locking (see program list).Typical applications: Horizontal, vertical/flange-mounted and cardan-shaft-coupled machines, machine trains (up to ten machines in line). (2010/Aug/19 10:49:51)

Laser Alignment Systems Easy-Laser D525 (EL-D525)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

Easy-Laser® D525 includes all programs and functions for the alignment of rotating machines that are included in system D505, plus all programs for geometrical measurements (see progam list). You add only those geometry accessories you need (included in Geo-systems; see next page).This is the most versatile measuring system if you mainly do shaft alignment, but need to be able to do geometrical measurements now or in the future, and want to be able to connect the BTA Digital.Typical applications: The same as D505, as well as BTA Digital and Geo systems when suitable measuring accessories from these are used. (2010/Aug/19 10:49:51)

Laser Geometrical Measuring Systems Laser Geometrical Measuring Systems (EL-D600)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

Versatile system for geometrical measurements. Thoroughly proven reliability and user-friendly design make it easy for you to measure almost anything. Simply add laser transmitters and other accessories to suit your purposes.
Typical applications: straightness, flatness, squareness, parallelism and spindle direction in machine tools, mechanical constructions, etc.(2010/Aug/19 10:49:51)

Laser Geometrical Measuring Systems D630 EXTRUDER (EL-D630)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

This system is designed to measure straightness and direction of pointing, primarily on extruder pipes. The well-thought-out design of the system ensures that the measurement procedure is quick and accurate. Diameters down to 20 mm can be measured. Handles up to 150 measurement positions.
Typical applications: Extruders, hydraulic pipes, etc.(2010/Aug/19 10:49:51)

Laser Geometrical Measuring Systems D650 LINEBORE (EL-D650)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

For straightness measurement of bores and bearing journals, both in production and in the field. Very stable constriction for highest measurement accuracy. Measures both open and closed bearing pockets with equal simplicity. Handles up to 150 measurement positions.
Typical applications: Crankshaft and camshaft bearings in diesel engines, bearing journals and hull penetrations in propeller shaft installations, workpiece positioning in machine tools.(2010/Aug/19 10:49:51)

Laser Geometrical Measuring Systems D660 TURBINE (EL-D660)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

For straightness measurement of bearing journals and diaphragms, where there are bearing halves with different diameters, primarily in turbines. Simple setup and measuring procedure. Handles up to 150 measurement positions.
Typical applications: Diaphragms and bearing journals in turbines, compressors, etc.(2010/Aug/19 10:49:51)

Laser Geometrical Measuring Systems D670 PARALLELISM (EL-D670)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

For parallelism measurement of rolls and stands in numerous applications. Up to 150 rolls or other objects can be measured. Any chosen object or the baseline can be used as a reference. You can also use the system to measure level, straightness and flatness.
Typical applications: Parallelism, straightness flatness and level/plumb of papermaking machines, printing presses, rolling mills, etc. (2010/Aug/19 10:49:51)

Laser Geometrical Measuring Systems D800 MACHINE (EL-D800)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

A new revolutionary measuring system which considerably shortens the time taken for measurement and alignment.Uses spinLaser TechnologyTM. This means that the laser beam makes a constant sweep (360°). You place the detector anywhere in the laser sector and record the reading.Typical applications: Straightness and flatness of machine tables and foundations, flatness of flanges, parallelism between press tables, etc. (2010/Aug/19 10:49:51)

Pre-Cut Shims Shims (Shims)(2011/Aug/5 17:37:55)

Fri, 5 Aug 2011 17:37:55 +0800

Make It Easy On Yourself...
To Solve Your Alignment Problems
You save inventory space by eliminating the need to carry a large selection of foil stock. Pre-Cuts or Alignment Shims can be reused because they're made of durable corrosion-resistant 304 stainless steel.
Unused Pre-Cuts are simply replaced in the case -- ready for the next job.

Shim thickness

Metric/

0.025 / 0.05 / 0.10 / 0.20 / 0.25 / 0.40 / 0.50 / 1.00 / 1.25/ 1.50 / 2.00 / 2.50 / 3.00

Imperial/

0.001 / 0.002 / 0.004 / 0.008 / 0.010 / 0.015 / 0.020 / 0.040 / 0.050 / 0.060 /0.075 / 0.100 / 0.125

Shims are marked both Metric & Imperial. Custom Shim on request.(2011/Aug/5 17:37:55)

Oil Analyzers Oil Analyzers (VIP Oil Analyzer)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

The VIP Oil Analyzer is capable of measuring contamination level, ferrous particle level and fluid viscosity with a single sample. It is the only instrument capable of simultaneously measuring these three critical parameters.
An operator can analyze up to fifteen samples per hour with a single instrument—the VIP Oil Analyzer is both fast and easy to use.
The VIP Oil Analyzer uses a computer-controlled pump to ensure constant flow, making it the most repeatable field instrument available.
The VIP Oil Analyzer has an easy-to-use inter-face with MAINTelligence Monitor.(2010/Aug/19 10:49:51)

Oil Analyzers POCKET VISCOSITY COMPARATOR (VISGAGE)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

(2010/Aug/19 10:49:51)

Other Maintenance and Measuring Tools Other Maintenance and Measuring Tools (MI-STROB1)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

Nova-Strobe–The standard for high intensity multi-function portable stroboscopes. Models are available with digital displays, battery or AC power, and a useful range of features which provide unmatched performance and value. Four models range from the Nova-Strobe DB Plus, the most versatile battery powered digital stroboscope with internal phase shifting, down to the Nova-Strobe BA, the most cost effective AC powered digital strobescope.
Both the battery powered Nova-Strobe DB Plus and AC powered Nova-Strobe DAPlus provide a range of 30 to 14,000 flashes per minute and an accuracy of +-0.01% of reading. Flash rates are easily adjusted to fractional RPM by a coarse/fine control knob. Individual TTL compatible input and output jacks are provided for'daisy chaining'of multiple strobes, triggering from an external source, or providing a trigger signal to external equipment.
Both DB Plus and DA Plus provide internal phase shifting to keep the target precisely in view. Both provide times 2 and divide by 2 capability for distinguishing actual RPM from harmonic frequencies. In addition, 6 user presetable memory flash rates for repetitive measurements and storage of the last flash rate measured are included.(2010/Aug/19 10:49:51)

Other Maintenance and Measuring Tools Phaser-Strobe PB 115 (MI-STROB2)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

Phaser-Strobe incorporate the unique design features of the Nova-Strobe DB Plus family with an increased operating range of 30 to 32,500 flashes per minute, as well as external phase shifting. The unique digital adjustment knob can select the decade for adjustments, so coarse and fine adjustments of flash rates are made quickly and with significantly better resolution than competitive units. The memory feature of the Phaser-Strobe allows three flash rates to be stored-displayed in flashes per minute or flashes per second. Phaser-Strobe operates with internal rechargeable batteries or continuously from AC line power with the optional power supply/recharger.
Features N.I.S.T. Traceable Certificate of Calibration included

Phase Shift adjustable as phase angle or time with resolution to 0.1° and 0. 0001sec
Phase Shift adjustable as phase angle or time with resolution to 0.1° and 0. 0001sec
Auto step mode provides motion viewing for high speed events
Backlit alphanumeric LCD shows flash rate, degrees, time
Store and recall three memory settings
TTL compatible input/output jacks, power for optional sensors
Tachometer mode from external trigger
- Phaser-Strobe PB 115 / Stroboscope, R-5(115Vac)recharger
- Phaser-Strobe PB Kit 115 / Same as Above with PSC-3(115 Vac)power supply/recharger and spare lamp in latching case
- Phaser-Strobe PB 230 / Same as Phaser-Strobe PB 115, but with R-6(230 Vac)recharger
- Phaser-Strobe PB Kit 230 / Same as Phaser-Strobe PB Kit 115, but with PSC-4(230 Vac)power supply/recharger(2010/Aug/19 10:49:51)

Other Maintenance and Measuring Tools Pocket-Tach Series (MI-PTACH)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

The compact and versatile Pocket-Tachs are ideally suited for non-contact, contact and linear speed measurements.
Pocket-Tach 100 is a general purpose non-contact optical tachometer that measures from 5 to 1000,000 RPM with an accuracy of up to +/-1 RPM. It is supplied in a padded carrying case and may be equipped with the optional Contact Tip Assembly (CTA-1) to make contact RPM measurements.
Pocket-Tach Plus Kit is a 30 function Tachometer, Totalizer/Counter and Timer (Stopwatch), menu programmable in both English and Metric rates. It is supplied complete tip assembly, including concave and convex tips and a linear speed wheel, in a latching carrying case. An optional Remote Optical Sensor (ROS-9P) allows this tachometer to measure RPM in hard to reach locations.

Features
N.I.S.T. Traceable Certificate of Calibration included

Safe non-contact operation up to 30 inches (76 cm) and 30 degrees from reflective tape
Unique ergonomic design provides direct line-of-sight viewing of display and target
Easy reading 6 digit LCD display
On-target and low battery indicators
Pocket-Tach Plus Kit provides maximum, minimum and last measurement memory(2010/Aug/19 10:49:51)

Other Maintenance and Measuring Tools Raymger ST (Raymger ST)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

The Raynger ST Series of handheld, noncontact thermometers uses infrared technology to measure the temperature of materials up close, or from a distance. Just aim, pull the trigger, and read the temperature on the large, backlit LCD display. Lightweight, compact, and easy-to-use, the Raynger ST can safely measure hot, hazardous, or hard-to-reach materials without contaminating or damaging the material’s surface. For fast, safe, and accurate temperature measurement, reach for a Raytek noncontact thermometer.
(2010/Aug/19 10:49:51)

Predictive and Proactive Maintenance Service Predictive and Proactive Maintenance Service (MI-PTACH)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

(2010/Aug/19 10:49:51)

Weekly Technical Reports and Customer Q&A Weekly Technical Reports and Customer Q&A (LF-SBL1)(2010/Aug/19 10:49:51)

Thu, 19 Aug 2010 10:49:51 +0800

(2010/Aug/19 10:49:51)